5.6 Double Layered Punchboards | v.20210625

In some games, a double layer punchboard is a great solution. This type of punchboard is actually two layers of punchboard glued together. The top layer will have areas punched out that can hold cubes, discs, meeples, or other components in a certain spot on that board. Please take extra care to ensure that any images on the bottom layer line up correctly with the punched out portions of the top layer. 


5.6.1 • Bleed and Margin 

All cardboard mat files must have 3mm of bleed and 3mm of margin. 


5.6.2 • Dieline spacing 

Please refer to 5.5.3


5.6.3 • Dieline file 

Please refer to 5.5.4

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.